DELTA I/O Module EME-R2CA Extended Product Type : VFD-E series Product ID: EME-R2CA Delta Type Designation : VFD-E series Features Setting range of 16-bit counter is K0~K32,767. (K0 is the same as K1. output contact will be On immediately at the first count. General counter will be clear when PLC is power loss. If counter is latched, it will remember the value before power loss and keep on counting when power on after power loss. If using MOV command, WPLSoft to send a value, which is large than setting to C0, register, at the next time that X1 is from Off to On, C0 counter contact will be On and present value will be set to the same as settings. The setting of counter can use constant K or register D (not includes special data register D1000~D1044) to be indirect setting. If using constant K to be setting, it can only be positive number but if setting is data register D, it can be positive/negative number. The next number that counter counts up from 32,767 is -32,768. Specification Operating Temperature :-10ºC to 50ºC (non-condensing and not frozen) Storage temperature :-20ºC to 60°C Installation Altitude :below 1000m Ambient Humidity : less than 90%RH (non-condensing) Vibration : Maximum 9.81 m/s2 (1G) at <20 Hz and maximum 5.88 m/s2 (0.6G) at 20-50Hz Resistive Load : C-A (N.O.): 5A 250VAC/30VDC C-B (N.C.): 3A 250VAC/30VDC Inductive Load : C-A (N.O.): 1.5A 250VAC/30VDC C-B (N.C.): 0.5A 250VAC/30VDC










